Close
Select the shipping country
  • Cart Italy
  • Cart Deutschland, Österreich
  • International
  • United States
  • We detected you are browsing from ###COUNTRY###, do you want to go to the specific site? Yes No Change country
    Abbiamo rilevato che stai navigando dall'###COUNTRY###, vuoi andare nel negozio specifico? Sì No Cambia paese
    Wir haben festgestellt, dass Sie von ###COUNTRY### aus surfen. Möchten Sie zu einem bestimmten Geschäft wechseln? Jawohl Nein Land wählen
    Atlante del Prosecco

    SPARKLING PROCESS METHODS

    Metodi di spumantizzazione

    Sparkling refers to the second fermentation process of wine. Also known as "presa di spuma", the sparkling process is based on the use of sugars and yeasts that trigger a fermentation process in the wine and therefore the formation of carbon dioxide and the typical bubbles.
     

    Prosecco history and curiosities

    Discover the history of Prosecco with its numerous curiosities, anecdotes, characteristics and advice for pairing.

    FIND OUT MORE

    This explains why, when the bottle is opened, the pressure of the carbon dioxide in the gas phase drops and suddenly the equilibrium is "broken". In order to re-establish it, it is therefore necessary that the molecules are dispersed and here is the formation of bubbles and the perlage effect that we all know. And this also explains that pleasant tickling sensation on the palate that makes Prosecco, sparkling wine and Champagne so appreciated all over the world.
     
    Sparkling wine is made using three main methods: Classical Method or Champenoise, Charmat Method or Martinotti and Ancestral Method. Let's see them in detail.

     

    metodo-classico-remuage

    THE CLASSIC METHOD or Champenoise

    It is also called Champenoise, a name that clearly identifies the origin of this method: the Champagne region of France. The Metodo Classico consists of inducing re-fermentation directly in the bottle, through the introduction of sugars and selected yeasts. In this way the wine acquires the traditional pressure, resulting from the accumulation of carbon dioxide, and the characteristic bubbles.
     
    After a period of rest, which can vary from 24/36 months to over 120 months, the remuage phase begins: each bottle is placed on special stands, called pupitres, which keep the neck lower than the bottom. The continuous rotation of the bottle causes the residues of the fermentation yeasts to deposit on the cork. In fact, one of the last stages is disgorgement, which consists of freezing the neck of the bottle to facilitate removal of the cork and allow the deposit to escape under pressure. The very last steps are the dosage, with the addition of a mixture of sugars and wine to restore the part of wine expelled, and the final capping. The Classical Method produces wines that tend to be more structured and full-bodied.
     
    The simplicity with which the process of sparkling wine making has been described actually hides a multiplicity of knowledge, secrets and techniques handed down from generation to generation. In this case, the mastery and skill of the winemaker are fundamental factors that guarantee the product unique and inimitable requirements and build the personality of the production cellar.
     
    A little piece of information: in 1994 the use of the term Champenoise was forbidden, except for Champagnes produced in the region of the same name. Throughout Europe, we therefore commonly refer to the Classical Method and the Cremànt Method for sparkling wines produced in the rest of France.

     

    01autoclavi-metodo-charmat

    THE CHARMAT or Martinotti METHOD

    Also called Martinotti-Charmat, from the names of Federico Martinotti of Asti, who invented the method, and Eugéne Charmat, who patented the equipment to put it into practice. The Charmat method involves a second fermentation in steel tanks at controlled temperature and pressure.
     
    Highly selected natural yeasts are added to the wine. The processing phase of a Charmat can range from 30 days to 6 months, the time required for the yeasts to take possession of the sugars and transform them into alcohol and carbon dioxide. The sparkling process of the Charmat Method is finally completed in the bottle. Usually this type of sparkling wine gives life to fresher and lighter wines.

     

    01glera-metodo-ancestrale

    THE ANCESTRAL METHOD

    The last method, less well known than the previous ones but no less important, is the Ancestral Method. The Ancestral Method uses the indigenous yeasts naturally present on the grapes for re-fermentation. The process therefore begins with the pressing of the grapes for the extraction of these yeasts and continues at low temperature in stainless steel barrels. This allows fermentation to be activated and then stopped so that it does not continue uncontrollably after bottling.
     
    It is an ancient and traditional method that produces wines with complex sensory characteristics and a typically misty colour. Wines made using this method do not undergo disgorgement and therefore retain all the yeast and fermentation residues.